Main features

• Advanced Calibration Tools

Comprehensive suite: temperature towers, flow rate, retraction & more for optimal performance.

• Precise Wall and Seam Control

Adjust outer wall spacing and apply scarf seams to enhance print accuracy.

• Sandwich Mode and Polyholes Support

Use varied infill patterns and accurate hole shapes for improved clarity.

• Overhang and Support Optimization

Modify geometry for printable overhangs with precise support placement.

• Granular Controls and Customization

Fine-tune print speed, layer height, pressure, and temperature with precision.

• Network Printer Support

Seamless integration with Klipper, PrusaLink, and OctoPrint for remote control.

• Mouse Ear Brims & Adaptive Bed Mesh

Automatic brims and adaptive mesh calibration ensure consistent adhesion.

• User-Friendly Interface

Intuitive drag-and-drop design with pre-made profiles for popular printers.

• Open-Source & Community Driven

Regular updates fueled by continuous community contributions.

• Wide Printer Compatibility

Supports a broad range of printers: Bambu Lab, Prusa, Creality, Voron, and more.

• Additional features can be found in the change notes.

Wiki

The wiki aims to provide a detailed explanation of the slicer settings, including how to maximize their use and how to calibrate and set up your printer.

• Access the wiki here
• Contribute to the wiki

Download

Stable Release

📥 Download the Latest Stable Release
Visit our GitHub Releases page for the latest stable version of OrcaSlicer, recommended for most users.

Nightly Builds

🌙 Download the Latest Nightly Build
Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.

Belt Printer Builds

The nightly release ships two parallel builds: the standard build and a belt-printer build. Both are attached to the same release — tell them apart by the filename suffix:

• Standard — no suffix (e.g. OrcaSlicer_Windows_Installer_x64_nightly.exe)
• Belt — _belt suffix (e.g. OrcaSlicer_Windows_Installer_x64_nightly_belt.exe)

The _belt builds add experimental support for belt / conveyor (infinite-Z) printers, where the model is sliced against a tilted belt surface instead of a flat horizontal bed. They include ready-to-use belt printer profiles, the full belt slicing pipeline (mesh rotation and G-code transforms), belt-aware support generation, and a tilted-bed preview.

> ⚠️ Belt printer support is under active development and is not yet merged into main — it currently ships only in these parallel _belt builds, produced from the <code class="ra0-md-code">belt-printer</code> branch. See tracking PR #14394 and the original documentation in #12998.

How to install

Windows

Download the Windows Installer exe for your preferred version from the releases page. Both x64 and arm64 installers are published — pick the one matching your CPU.

• For convenience there is also a portable build available.

Microsoft Store

Install from the Microsoft Store when you prefer a Store-signed package (helps on Windows 11 Smart App Control).

Windows Package Manager

winget install --id=SoftFever.OrcaSlicer -e

Mac

1. Download the universal DMG, which runs on both Apple Silicon and Intel Macs.
2. Drag OrcaSlicer.app to Application folder.
3. If you want to run a build from a PR, you also need to follow the instructions below:

      xattr -dr com.apple.quarantine /Applications/OrcaSlicer.app

Homebrew Cask

brew install --cask orcaslicer

The Homebrew cask installs the official macOS DMG from GitHub Releases.

Linux

Flathub (Recommended)

OrcaSlicer is available through FlatHub:

Install from the command line:

flatpak install flathub com.orcaslicer.OrcaSlicer
flatpak run com.orcaslicer.OrcaSlicer

It can also be installed through graphical software managers (KDE Discover, GNOME Software, etc.) when Flathub is enabled. Search for OrcaSlicer in your software center.

AppImage

AppImages are published for both x86_64 and aarch64 (ARM64). Pick the file matching your CPU — the ARM64 build has aarch64 in its name (e.g. OrcaSlicer_Linux_AppImage_Ubuntu2404_aarch64_*.AppImage).

1. Download App image from the releases page.
2. Double click the downloaded file to run it.

1. If you run into trouble executing it, try this command in the terminal:

chmod +x /path_to_appimage/OrcaSlicer_Linux.AppImage

How to Compile

All updated build instructions for Windows, macOS, and Linux are now available on the official OrcaSlicer Wiki - How to build page.

Please refer to the wiki to ensure you're following the latest and most accurate steps for your platform.

Klipper Note

If you're running Klipper, it's recommended to add the following configuration to your printer.cfg file.

# Enable object exclusion
[exclude_object]

# Enable arcs support
[gcode_arcs]
resolution: 0.1

Supports

OrcaSlicer is an open-source project, and we're deeply grateful to all our sponsors and backers.
Their generous support helps fund filaments and other essential 3D printing materials for the project.
Thank you! :)

Sponsors

Backers:

Ko-fi supporters ☕: Backers list

Support the project

Some Background

Open-source slicing has always been built on a tradition of collaboration and attribution. Slic3r, created by Alessandro Ranellucci and the RepRap community, laid the foundation. PrusaSlicer by Prusa Research built on Slic3r and acknowledged that heritage. Bambu Studio in turn forked from PrusaSlicer, and SuperSlicer by @supermerill extended PrusaSlicer with community-driven enhancements. Each project carried the work of its predecessors forward, crediting those who came before.

OrcaSlicer began in that same spirit, drawing from BambuStudio, PrusaSlicer, and ideas inspired by CuraSlicer and SuperSlicer. But it has since grown far beyond its origins. Through relentless innovation — introducing advanced calibration tools, precise wall and seam control, tree supports, adaptive slicing, and hundreds of other features — OrcaSlicer has become the most widely used and actively developed open-source slicer in the 3D printing community. Many of its innovations have been adopted by other slicers, making it a driving force for the entire industry.

The OrcaSlicer logo was designed by community member Justin Levine.

License

• OrcaSlicer is licensed under the GNU Affero General Public License, version 3.
• The GNU Affero General Public License, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
• OrcaSlicer includes a pressure advance calibration pattern test adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.
• The Bambu networking plugin is based on non-free libraries from BambuLab. It is optional to the OrcaSlicer and provides extended functionalities for Bambulab printer users.